I've got a burst hose on the backhoe but can't get at one end of it to replace. How do you get the backhoe to move away from the chassis? Is it via the circled lever in the attached picture? If so, it's seized up Any tips on how to free it - bearing in mind that I've got a burst hose!
Which end of the hoscan you get at? If it's the end nearest the supply you could uncouple it and fit a blank then you can operate the machine without loosing more oil.
__________________
At the end of the day it's going to get very dark!
The clamps should loosen up if the machine isn't used for a couple of days. you might be able to winch or push it over with another machine if you have one available? Depends what position the arm is in as to how easy that will be to achieve.
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JCB 3CII backhoe help
Any tips on how to free it - bearing in mind that I've got a burst hose!
Linear Mode
